Pages

Saturday, August 31, 2013

Sweet Music


Scrapkit by Abstract Creations called Pianissimo sold here
Tube by Jennifer Janesko sold here
Font Allura
Filters/Plugins:
Xenofex2-constellations
Xero-Radiance

Start with a 600 by 600 canvas
Resize F4 by 90%, click inside, expand selections by 5, paste paper4 as a new layer, inverts elections and delete the excess.
Place El12 behind the frame backgroumd. Repeat paste until you have made a circle then merge the meshes down. Apply Xenofex2 Constellations keep the black fill ticked in the settings.
Flip and mirror e10 and place to the top right.
E16 add noise Gaussian at 100 monochrome checked then place above the frame layer.
Resize e21 by 90% and place to the right.
Place e24 and e28 around the piano.
Resize e18 and e30 by 50%
Free rotate the flute 50 degrees to the left.
Resize e25 by 35% and place around the bottom
 Add your tube and apply radiance
 Resize e3, 32,37 and WA by 50%
 Add a thick gradient glow to the wordart and wire element
 Add your name, artist URL, CR and your license number

Thursday, August 29, 2013

Blood Of Dracula


Scrap kit By Chichi Designz called Kurama Phoenix 7-2 available soon at CDO
Tube by Dave Nestler available for purchase at CDO
Font Blood of Dracula
Template 131 by Spawn found here for download

Open the template and delete the CR layer
Activate the main background layer and copy/paste paper1 into selection.
 Place the clouds element on top of this layer to cover the small bits of white on the paper.
Merge thick lines 1 and 2 , copy/paste paper into selection
Copy / paste paper5 into big dode , paper4 into thin line and resize paper 6 by 40%, invert selections of the small dode and delete the excess.
Place the tombstone to the left above the thin line border. and the grass on each side of the tag.
Place your tube as the first layer
 Resize the noose blood splatter and crow by 50%
Resize the spider, the hand , mirror the web by 25%
Place the fog on each side then add your name apply eye candy 4 glass at default
Crop your tag then add the artist CR, URL and your license number.
Save as a PNG

 To make the avatar merge the small dode frame and background. resize it at 150 pixels add your tube., erase over hang and add your CR and license number.
Thanks for looking



Wednesday, August 28, 2013

Tag Showcasing Scraps By Abstract Creations


Scrapkit By Abstract Creations called Fading Flora AVAILBE NOW AT THE PSP PROJECT  soon

Tube by Zindy S.D. Nielsen found here for purchase
Font-Special Type
Mask By Rebel Designz
Snag available below( click to enlarge)





Tuesday, August 20, 2013

Tag showcasing ScrapsIB Anna marine 7-2


Scrap kit by Chichi Designz  Anna Marine 7-2 available Aug 23 2013 at CDO store


Friday, August 16, 2013

Petted Teach

Scraps used is by Crazy Carita 
Tube is by Dave Nestler found here for purchase
Font -Feena Normal
Mask WSL 84
Filters / Plugins Mura Mesiter Copies 
Start with a 600 by 600 canvas and place el4 to the right, duplicate it and mirror.
Merge them down , click inside the frames, expand the selections by 3, add a new raster layer then copy/paste flipper paper6 into selections.
Add a thick white gradient glow to the frames. 
Place el 25 and apply the gradient glow again.
Add el12 to the right of the frames.
Size el19 by 25% then place your main tube.
Place el 23 behind the tube and around the back of the frames
Resize elements, 1,15,17,21 by 50%
Then resize el2 by 85%
Place paper 1 and apply your mask.
 Add your name and a gradient glow, Change the blend to hard light.
 Place the artist URL, CR and your license number.
 Thanks for looking

Thursday, August 15, 2013

Power Of Love

Kir By Crazy Carita  
Tube by Armando Huerta( no longer sold)
He sells his prints here
Mask WSL 84
Script font of choice
Filters/Plugins
VM Natural Sparkle
Eye Candy Nature- Water drops
Eye Candy Impact- Perspective Shadow

open a canavas 600 by 600 and place el20, click inisde expand selections by 3, add a new raster layer and copy/paste paper4 into selections.
Size el4 by 25% and place at the top corners of the frame.
Place paper 5 and apply your mask.
Place el1 and el12 behind the paper layer of the frame.
Place el 7 and mirror el 16 on top of the frame to the top left.
Resize el 18 by 85%. Apply Eye Candy 5 nature water drops to the leaves and rose.
 Duplicate the rose and resize by 50% and place in many positions behind the frame. I used Mura Meister copies setting to glob to assist.
Apply VM Natural Sparkle size 13 to the  roses.
Resize el 3 and 6 at 80% then free rotate the string
Rotate el5 90 to the right
Place your tube and apply perspective shadow
 Add the love wordart your name, artist URL.CR and your license number.
 Thanks for looking

Wednesday, August 14, 2013

Sweet Meadow


Kit by ChiChi Designz called   IB- ElizabethAustin 14-2 Found here for purchase
Tube by Eugene Rzhevskii the July bonus tube from Picsfordesign.com
Grab his awesome art here for purchase.
Font Luna Bar
mask of choice
Filters/Plugins
Paper textures
Eye Candy 4 Gradient glow

 Open a new canvas sized 600 by 600
Resize frame1 , arch and flower frame by 85%
Place the arch behind  frame 1. Click inside frame1 with your magic wand, expand selections by 2, add a new raster layer and copy/paste paper 3 into selections. Keep activated and place your tube above the frame1.Invert selections and Erase the bottom half of the tube and any part hang off the sides.
Resize butterflies and sparkle by 85% and place above the tube layer. erase any artwork over the tube's face.
Resize the grass by 85% and the flower brush by 65%
Add your name  in a gradient using the two colors from the kit. Apply Paper texture medium canvas to the name then a thick white gradient glow/
Add paper1 as the last layer and apply your mask
 add your artist URL, CR and your license number Thanks for looking




Tag Showoff Of Chichi Designz Kit

Kit used in this tag is available for purchase here called Ted Hammond 27-3
Made by Chichi Designz


Tuesday, August 13, 2013

Sun Stroked Beauty 4 Piece set





We will start this set with the main tag then work our way to the forum tag, avatar  and last the name tag.
The tube I used is by Barbara Jensen called Sun Stroked. It is a bonus tube you get when you buy tubes for the total of ten dollars or more.
Scrap kit By Crazy Carita called Greenery found here for purchase

Barbara Jensen  can be found here for purchase

Mask i used WSL84 for both the main tag and name tag
Font used -Feathergraphy
Filters/plugins-
Eye Candy4 Gradient glow
AAA frames
PSP Filter-Photo Filters-Film and filters-Glamour( my new obsession LOL)

Nutty but true I started with a canvas sized 800 by 800 we can crop and resize later.
Place el9, click inside with your magic wand, expand your selections by 3, add a new raster layer copy/paste paper9 into selections.
Place28 behind the frame to the left then duplicate mirror and merge. erase the vines sticking out on the top. Duplicate the vines and free rotate then 90 to the right.
 Place el6 on the right above the rotated vines layer.
Place your close up tube and apply Photo Filters-Film and filters- glamour at default.
Place el 6 to the left of the tube.
Duplicate it and rotate 90 to the right.
Resize el by 95%
 Place el7,8 and 20
 then place2l 29 rotate 90 to the left on the top. Resize by 80% and place around the arrangement.
Place el 14
Resize 19,21 ans 11b by 25%
Add paper5 and crop your tag
 Apply your mask. close your mask layer and background layer
 Shift"d" and copy your worskspace.Merge visible and resize your tag to 600 by 600  sharpen then apply Photo filters-film and filters- glamour -warming
Add your artist URL, CR and your license number
 Add your name and a gradient glow
Save as a PNG

To make the forum tag set your canvas to 600 by 350
 On your original tag not the copy close the tube , background and frame paper layers. merge visible and 
 paste on to the left side
Place paper9 behind it. Place the closeup to the right Crop your tag. Activate your closeup tube, add a new raster layer flood fill with a gradient that matches your paper. move under your tube layer change the blend  to the tube to luminance
Add you smaller tube to the left. crop your tag then merge visible and apply  Glamour as we did before and AAA Frames to these settings:
3,5,0,0,0,0,0,44
 Select all, float then modify, selection borders 1, add a new raster layer then flood fill it in white. Add Noise Gaussian 95
Add your name, artist URL, CR and license number
 Save as a PNG

To make the avatar set a new canvas 150 by 150.
Copy the merged forum tag and repeat the same function to make the borders.
Add your initial,Artist CR and your license number' Save a s a PNG

To make the name tag open a new canvas sized 600 by 150
Type out your wordart or your name your choice. i used the name of the tube
Sun Stroked in the font Barbe display ssk sized 75
use your pick to stretch from end to end giving enough room for a thick gradient glow. i used the same gradient i used for the close up tube background on the forum tag for my lettering. convert to raster and duplicate. Add a thick white gradient glow to the bottom wordart and a drop shadow. Place your tube in many different positions around the letter being sure to show the face in some part of the lettering. activate the top wordart, invert selections and delete the tubes excess, Change the blend to hard light.
To design the background I used the original unmerged tag. Close off the background, tube,frame the left of the word art.  and frame background. merge down the cluster of flower on the bottom of the tag resize by 50% and place to the left of the wordart.
Merge the cluster of flowers on the left side of the tag, resize by 50% and move to the right of the wordart.
 Resize el28 by 45% free rotate it 90 to the right., duplicate and flip. place them in the middle.
Resize el30 by 25% and place in the center.
 In the original tag merge the bow little frame and background, free rotate 10 to the left and resize by 65%
Add your name artist CR, URL and your license number.
 Crop your tag add paper 9 and apply your mask. Close the tube layer, and two wordart layers then apply Glamour to your tag
Unhide layers then save as a PNG
 Thanks for looking



Monday, August 12, 2013

Dreamer

Scrapkit by Chichi Designz called Dreams found here for purchase
Tube by verymany found here for purchase
Template by Jackie's Jewels found here for download
Filters/Plugins
Xero-Radiance

Open your template and delete the wordart layers , dotted layers and credit layer
Place the tagback as the last layer
Place brush2 above the tag back layer towards the top.
Place brush4 on the top and bottom.
Place the gliiter to the top left, duplicate,mirror and flip.
Merge layers1 and2, copy/paste paper6 into selections
 Reduce the Size of the clock by 50% and place over layer3.
Repeat with the fan element, rotate using your pick tool and cover layers 5 and 6.
Activate selection on layer7 paste paper 14 as a new layer, invert selections to trim the paper
Size the branches element by using you pick tool to pull the sides in to match the length of the thin rectangles.
Size branches2 down to 98% and place above the thin rectangle layers.
Merge layers 9 and 10 and copy/paste paper4 into selections
Repeat with paper 18 on layer 11.
Paste your tube above layer12 resize it by 45% and close the layer to adjust a bit later.
Add noise at 93 to layer13
Reduce the size of your gazebo by 80% place above layer 13. Activate the circle layer selections, invert selections and erase the grass hanging paste the circle on the bottom and sides.
Place clouds under the gazebo
Resize flower2 by 65%
Place the curtains on the left side of the gazebo using layer 12 as a guide on your left and the pole of the gazebo on your right. resize and pick tool to adjust.
 Open your tube layer and move to show the face, erase and part of the tube past layer 12 edges and change the blend to hard light.
Size grass2 by 75% and place on the railing edge of the gazebo.
Size sparkle6 by 50% and place butterfly sparkles
Mirror the dove and size by 25%
 Resize your tube and place Apply Photo effects-film and filters- settings to film filters vibrant foliage then apply Xero Radiance at default.
Plants2 and flower brush 4 resized at 50%
Jar at 35%
 Add your name, artist CR, URL and your license number
 Thanks for looking

Sunday, August 11, 2013

Floral Friends

Scrap kit By Crazy Carita called Greenery found here for purchase

Tube by Barbara Jensen found here for purchase
Filters/Plugins
VM Natural -Sparkle
Mura Meister Copies-Tiling
Mask WSL84
Fonts used
Shipped Goods
Sackers italian script
Mon Amour

Open a 600 by 600 workspace and place el10. Resize it to 120%
Place paper1 behind it , click inside the frame with you magic wand, expand selections by 2, invert selections and delete the excess paper. place your tube close up ad delete the excess tube. Change the blend to screen.
 Place the paper again and apply the mask. using the pick tool increase the size of the mask then merge the group, duplicate the mask change the blend to screen them merge down.
Type out floral friends in the sackers font in green and apply Mura Meister copies- tiling spacing at 4 .Then activate the mask layer, Selections-select all- float-invert selections then delete the excess wording.Change blend to hard light and the opacity to 36.
Duplicate the frame layer then apply  Gaussian blur at 10 and VM Natural sparkles size 13. Change the blend to hardlight
Resize the elements
16 and 28 by 50% both flipped
Place 12 and 17' 
Resize el9 by 35% twice then sharpen
 Duplicate the vines then 
place behind the frame background
For the wordart type out friends, flowers and beautiful in the shipping good font. The other parts in the sackers font. Arrange how you please
Type you name in the MOn Amour font
Add you artist CR, URL and your license number
 Thanks for looking



Hollywood Glamour

Scrapkit used Hollywood Glam by Crazy Carita found here for purchase

Tube by Barbara Jensen found here for purchase
If you buy 10 dollars or more you get the awesome bonus tube pictured below
VM Natural LightSplash was used

Open a canvas 600 by 600 and place el26 to the bottom left, duplicate and move to the top left. Merge them down,mirror and merge again.
Place el 22 behind it and el 9a behind the mesh to the top left, duplicate and move to the bottom right.
Place el 28 as the top layer then place el8 above that. Click inside with your magic wand and expand the selections by 1, add a new raster layer and place paper1 into selections.
Apply VM Natural Light splash at these settings:
117,139,166,255,41,75
Place your tube in front and apply Film and Filters found in your PSP-Glamour- dropdown set to warm
Add a thick drop shadow.
Flip el12 resize 80%, draw preset shape triangle in white angle to make it look like a light is shining out of it.Lower opacity to 39, gaussian blur of 3 and blend set to screen.
Flip,mirror and resize el 13 50%,mirror el29 resize it by80%.
Free rotate el2 30 to the left and resize it by 65%
Resize elements 1,7,30 by 50%
El 6 by 25%
Place wordart and resize by 50% then by 80% sharpen and add a gradient glow
 Add your name artoist URL and your license number
 Thanks for looking


Soft and Sweeter



Scrap Kit Used is made by Crazy Carita 
Tube by Amy Matthews Now sold at CDO( I had those tubes from the AMI store)
Mask by Rebel Designs
Filters/plugins:
Mura Meister Copies- Glob and Encircle

Start with a 700 by 700 workspace
 Add el12,duplicate,resize by 50%, duplicate the smaller version and move down to the left and right of the larger frame.
Click inside the smaller frame, expand selections by 6 place el1 under the small frame, invert selections and delete the excess. Repeat with the other frame using el4
Resize el2 and 9 by 50%
Place el22 behind the small frames on each side
Place el3 on top of the larger frame, duplicate and free rotate it 90 to the right
Place el17 under the rotated flowers
Add el8 and resize it by 50% apply Mura Meister copies glob-
Settings( I lost mine but these are close)
Scale set to 0
Rotation-293
angle-25
x-98
y-26
Place under the top area of the two small frames. Duplicate flip. duplicate again free rotate 90 to the right then apply Mura Meister copies encircle and move to the bottom.
 Add paper1 and apply your mask.
Click inside the large frame, expand selection by 6, add anew raster layer and copy/paste the same paper into selections.
Place your main tube in the center behind the roses layer. Then place another tube or the same one your choice over the paper layer. On one side change the blend to screen 91 opacity and luminance  opacity 26
Add your name, your Artist URL, CR and your license number
 Thanks for looking




Tag made with Kit Called Butterfly Blues

 This tag was made with the kit called Butterfly Blues by Crazy Carita found here for purchase and the New tube by Barbara Jensen found here for purchase. Check out the bonus tube pictured below