Mask LNL#5 by me( right click and save to your computer . Mask found at the bottom of the tut)
Toadies- where are you
Xenofex - constellations
Eye Candy Gradient Glow
Open the template then hit shift D together to copy then delete the original
Reduce the entire template by 650 pixels on it's widest side then expand your canvas to 650 by 650.
Reduce your tube by 40% and duplicate it.
On the top tube change the blend to soft light
on the bottom tube add a drop shadow of
Looking at the template I copy/pasted the following into the layers
Yellow rectangles top and bottom i pasted two different yellow papers
I repeated this with the pink rectangle layers with the different pink papers
Blue top rectangle I pasted a green paper and the bottom one i used a blue one.
I pasted paper21 into the circle layer and add a thick black gradient glow.
Apply Noise at 100 Gaussian three times' Repeat with the pink rectangle layers
Duplicate the top blue rectangle layer then paste another green paper into it.
the rectangle in the center of the circle I opened up all the solid papers and placed them into their own layers above the original rectangle layer. Using your selection tool feather set to 20. select the top part of the paper and hit delete. Repeat this until you have some stripe. I color changed some papers after i ran out of colors to match the colors in my tube's boots.
Once done merge them all down.
Take your closeup tubes and add them to this layer change the blend to one tube to screen and the other to hard light
Duplicate this merged layer and apply Toadies where are you at default then apply Xenofex Constellations setting to small stars.
Duplicate the original rectangle again apply Gaussian blur of 5 and change the blend to soft light and place under the tube layer,
Duplicate top pink rectangle and free rotate it 25 to the right. copy paste paper7 duplicate flip and copy paste paper14
add the splatter behind the template layers.
Place the sparkles above the tube layer
Reduce the following elements
beaded string , lights, wordart-50
Barbed heart, lips, flame, logo, bomb -25
bunny , string, cupcake, skateboard- 35
frame 2 -80
mirror frame 2 then duplicate and flip. click inside the top frame and add a new raster layer color fill it in black.
Above that layer add the mesh star and reduce by 35%, apply the same noise we did before. Place the star across the bottom and top of the tag.
add paper17 and apply the mask below
click to enlarge then right click to save to your computer
Add your name then convert to raster.
then modify selections- selection borders size 2 , add a new raster layer copy /paste paper21 into selections and apply the same noise we used before.
Start with a canvas sized 650 by 650 flood filled in white
Reduce the size of element 16 by 90%
Using your freehand selection tool set to circle click the center of the element and draw out a circle the size of the larger circle.
Add a new raster layer and copy /paste paper 12 into selection
Place the tube and mirror it.
Move it to the far left where you can see the face of the tube, then duplicate it and move it to the right and move it a layer under your first tube, repeat this again but move the tube to the far right.
You should have three tubes.
Duplicate the tube one more time and reduce by 80% then 50% and close for the moment.
On the tube on the far left lower the opacity to 40 then activate and hit delete on the two other tubes,
On the center tube activate and hit delete on the right and left tube then lower the opacity to15.
Activate the far right tube then hit delete on the other tubes and lower the opacity to 7.
Activate the circle layer,invert selections then delete the excess tubes.
On the circle layer got to SELECTIONS- SELECT ALL-MODIFY- SELECTION BORDERS size 5 then apply EYE CANDY-IMPACT-GLASS.DO NOT DESELECT.Apply the glass filter to the tube layers as well.
Apply Noise to the dotted frame layer Gaussian 100 three times then add a drop shadow of 1,-1,61,5 black
Add paper8 as the last layer and apply your mask. Merge group and using your pick tool set to scale pull the nodes to each edge of the canvas, then duplicate the mask and reduce by 65%.
Move to the top left corner then duplicate and mirror.
Opne your reduced tube layer and place to the left side of the canvas, apply drop shadow 5,-4,37,5 black, then duplicate the tube and apply
EFFECTS-DISTORTION EFFECTS-WIND- from the right at 50 and move this under the tube layer.
Building the tag from the above the tube layer reduce the following elements
21 by 65%
18 by 40% mirror and flip
13 50% then flip
14 by 25%
11 by 50%
place el 42
7 by 40% then free rotate 20 to the left
Elements under the tube layer
39 by 50% place twice once to the top left , again to the bottom right above the masked layer
33 by 25%
14 by 35%
20 by 50%
Apply the same drop shadow as the tube to all the elements.
Add your name, convert to raster then duplicate and apply the glass filter then merge down and apply the drop shadow twice.
Reduce el 72 by 50% place to the bottom right corner
Dupliacet flip and mirror. move to the top center touching the bottom part to the top part of the first element.
duplicate the original element again and move to the left .
Duplicate the last element made reduce by 80% flip and move to the top left, duplicate mirror and move to the top right.
Your new frame should look like this
erase the inside of the frame to create a frame background
Place 2 papers first paper is #13 the sky matches the shirt on my tube.
then place paper12 above it. using your freehand selection tool set to point to point select the sky on the top paper then hit delete. you dont have to go crazy with the edges. Use your background erase tool and select the sky from the top paper and click enter to delete any portion left that we didn't select with our tool.
Then duplicate the top paper which is now the road and dirt change the blend to multiply then merge down and merge again to the bottom paper.
Click inside our newly made frame, expand our selections by 2 invert selections and delete the excess paper.
I added some clouds so reduce el 99 by 25% and place to the top right, duplicate flip and move back to the top right. erase anything pass the frame edges.
Reduce el 90 by 50% and place behind the frame background layer about three times.
place paper and duplicate changing the blend to multiply. merge down then apply your mask
Reduce el 3 by 50% and place behind the tube on the road
Reduce el 7 by 80% and free rotate it 10 to the right
at the base of the tube from left to right reduce the following elements
34-25% then again at 80%
45-50% then again at 80 duplicate and change the blend to multiply
behind the tube reduce the following from left to right
el1 and 14-50% duplicate and change the blend to multiply
Place this wordart
Or make your own. i used three fonts
Impact, Road rage and Quixotte
Add a thin gradient glow and drop shadow.
click the word Open road and add a new raster layer copy/paste the same paper we used in the masked layer
Add your name then apply EFFECTS- ARTISTIC EFFECTS-CHROME at these settings:
Open a new canvas flood filled in white size 650 by 650
add el7, duplicate it and reduce by 75% then free rotate it 50 to the right.
Duplicate the reduced star and resize by 50% then mirror and move back to the left .
On the large star click insdie and expand the selections by 2. place peper 6 behind it,invert the selections then apply EFFECTS-ENHANCE edges twice. then apply Xenofex2 constellation small stars.
Activate the large star again and expand the selections by 2, add a new raster layer and flood fill with a silver gradient. add noise at 100 and apply the constellations filter again.
Click inside the medium sized star and contract by 4, add a new raster layer and copy/paste paper1 into selections.
Click iside the frame again and expand your selections by 2, add a new raster layer under the first one and copy/paste paper2 into selections and add the same level of noise to that layer.
Grab your close up tube , mirror place over the grey star layer change the blend to exclusion and erase any of the tube hanging past he grey start edges.
click inside the smallest star , expand the selections by 2, add a new raster layer then copy/paste paper 3 into selections.
Place your main tube on to the canvas then apply Photo effects- film'filters glamour at default.
Free rotate el18 90 to the left, reduce elements 20 and 26 by 35%
Building from the bottom up place paper10 then apply your mask
place el 17, 19,15 then 22
flip and mirror el8 reduce by 50%
In the Prisma font sized 95 pixels type Tease Me in the silver gradient then sharpen.
I the wave zone font use the silver gradient as your outline and the color black for your font color. type each letter of your name in a separate layer. then arrange the letters up then down and overlap as you desire. merge the letters down the drop shadow and sharpen.
Reduce paper 9 by 455 and place under the frame layer
reduce lightening by 35% and the moon by 50%
Place the door on each side of the frame.
place wings1 behind the horns on the frame.
reduce metal1 by25% and place over the mouth area of the horned skull of the frame. reduce blood drips by 50% and place under the fangs then erase any part of the drops past the right and left edges of the fangs.
Reduce sparkles2 cemetery, coffin1 and clouds1 by 50%
cocktail1,blood bag Candles 1 and 2 by 25%
handprint1 by 35%
place blood splatter 1,2 and 4
Grass1 by 80%
Add your tube and reduce to fit.
Apply EFFECTS- PHOTO EFFECTS- FILM/FILTERS- GLAMOUR Setting to NIGHT EFFECT level 30. then duplicate your tube and change the blend to overlay and opacity to 59%
Add paper12 and apply your mask.
Add your name, artist URL./CR and your license number
Open your template Press Shift"D" to copy . Delete the original and resize the entire template by 650 pixels at it's longest side.
Add a new raster layer at the last layer and flood fill with a gradient using these two colors
Apply your mask.
Add strass deco to the bottom left and duplicate, mirror and flip
copy/paste paper5 into the selections of the black oval layer
Merge the right and left blue rectangles and copy/paste paper8 into selections.
Reduce frame 2 by 35%and place over the left bottom , duplicate and place over the right top. It will be too short, Use your pick tool set to scale and pull the nodes to the left to lengthen the frame over the paper.
copy/paste paper2 into the selections of layers right and left purple
Merge right and left pink circle and copy/paste paper2 into selections then add a thick white gradient glow
Place bling at the bottom right and top left
Place paper 12 then click layers pink rectangle left and right then invert selections and delete the excess paper.
Copy/paste paper7 into black left and right then apply a thick white gradient glow to both
copy/paste paper9 inot blue left and right. Add a thick gradient glow.
Type the word Bitch in the smeyer font in size 20 pixel, align to canvas then convert to raster. Apply Mura Meister copies tiling angled spaced at 2. select the layer we just papered invert selections then delete the tiled wording that is showing paste the layer . change the blend to soft light and drop shadow the wording layer
Merge the frame filled background and flood fill in the same gradient we used for the masked layer.
add the close up tubes to the layer. one side change the blend of the tube to soft light the other change to hard light.
duplicate the gradient layer again and apply LENK filter Fredrick and change the blend to multiply
Add your tube and reduce by 35%, duplicate and apply Eye Candy Shadowlab at these settings:
reduce the following elements
lips by 25%
cellphone and lip stick at 15%
mini player at 20%
bag at 50%
shoe at 25% then free rotate at 25 to the left, duplicate mirror and move over the first shoe
hat by 355 then 25 to the left
ribbon and roses by 35%
Hortensia by 255 then 50%
add your name, artist URL/CR and your license number.